Mittelstandspresse
11.11.2026
KHS stretch blow molding technology: established on the market. Continuously optimized.
Holistic approach to PET bottle production / Airback 7 PRO compressed air recovery system generates additional savings potential /KHS UltraLite: 1.5-liter PET bottle weighing just 15.5 grams
Dortmund, 11.11.2026 (PresseBox) - With its proven NIR heating technology and market-established Double Gate concept, KHS provides stable processes and effective energy consumption in PET bottle production. Further savings potential is generated by Airback 7 PRO: the latest generation of the KHS compressed air recovery system cuts the high-pressure air requirement during stretch blow molding by up to 60% over systems without Airback. The potential this interplay of various factors holds for lightweighting is illustrated by KHS UltraLite: the new 1.5-liter PET bottle for still water weighs just 15.5 grams.
“Our customers are extremely keen to lower their operating costs along the entire line and produce reliably over the long term. As their strategic partner, we support them from planning through operation to continuous optimization,” says Arne Andersen, stretch blow molding product manager at KHS. With its lifetime solutions, KHS provides holistic services to this end throughout a machine’s full life cycle. Further technological developments enable existing lines to be tailored to new requirements.
For PET bottle production, KHS extensively coordinates the stretch blow molding process, machine technology and bottle design with one another. Here, targeted savings in energy and material consumption are given the same weight as bottle quality, line availability and productivity. “Only when we consider these factors as well can we unlock additional potential across the entire system,” Andersen explains.
Double Gate for lower energy and space requirements
The Double Gate heating concept (DoGa) gives customers an option designed to reduce their energy and space requirements. It’s used on the InnoPET Blomax Series V stretch blow molder and is thus also included in combined KHS block systems. Based on proven near-infrared radiation or NIR heating technology, the preforms are transported through the heater in two parallel lanes for effective heating.
Here, KHS’ compact Double Gate heating concept permits energy consumption to be reduced by up to 40% compared to similar single-lane stretch blow molders. “Our technology has established itself as a benchmark in our customers’ daily production operations. International users thereof include Coca-Cola Europacific Partners (CCEP) and Suntory PepsiCo Vietnam Beverage, for instance,” states Andersen.
Latest Airback generation provides additional savings potential
With Airback 7 PRO, the latest generation of the KHS compressed air recovery system, the Dortmund engineering company generates additional savings potential in the stretch blow molding process. Before the bottle is demolded, the high-pressure air is recovered and reused to stretch subsequent preforms. Additional compressed air only has to be supplied by the compressor for the final blow molding process. As opposed to the previous model, the new generation has an extra recovery stage, thus increasing the possible reduction in compressed air consumption from 40% maximum to up to 60%.
“The lower compressed air requirement cuts the amount of energy required by the compressor and thus also operating costs. Accordingly, the smaller compressor size also potentially lowers the cost of investment,” Andersen claims. The first PET lines featuring this setup have been successfully installed for several customers. The consumption figures logged during production there confirm the values given for the system. Airback 7 PRO will initially be installed on new KHS PET lines only. In the near future, however, the compressed air recovery module will also be available as a retrofit for modernizing existing plant machinery.
KHS UltraLite proves convincing with very low material consumption
With its especially light 1.5-liter bottle for still water, KHS UltraLite, the systems supplier illustrates which potential stretch blow molding technology holds regarding particularly low consumption of PET material. The container clocks up a mere 15.5 grams on the scales. The lower weight of the neck area and specific design of the body and base geometries give it the necessary stability without the need for additional nitrogen dosing. According to Andersen, the interaction between the bottle design and system is key to its optimization. With its holistic container consultancy program Bottles & Shapes, KHS supports its customers throughout the entire PET bottle development process – from preform through design to final coordination with the production process.
“We’ve precisely aligned material distribution, the heating profile and blow molding pressure with our KHS process technology. Our new concept bottle shows which benchmark we can achieve in material consumption while retaining the container quality when packaging development and systems engineering dovetail with one another,” says Felix Kösters, the man responsible for packaging development in the Bottles & Shapes program.
For more information go to:
https://www.khs.com/en/company/news/press-releases
Why not subscribe to our newsletter so that you don’t miss any of the latest news? https://www.khs.com/en/company/news/khs-competence-web-magazine
Ansprechpartner
Alisa Altrock
+49 251 6255 6123
Zuständigkeitsbereich: PR consultant
Datei-Anlagen:
(434 kB)
1639845.attachment
Ganzheitlich gedacht bis zum Pack: Das 1,5-Liter-Sixpack mit der KHS UltraLite vereint geringes Flaschengewicht mit Behälterstabilität und Produktschutz.
(5 MB)
1639840.attachment
„Als strategischer Partner begleiten wir unsere Kunden von der Planung der Li-nien über den Betrieb bis hin zur kontinuierlichen Optimierung“, erklärt Arne Andersen, Product Manager Streckblastechnik bei KHS. / “As their strategic partner, we support our customers from line planning through operation to continuous optimization,” says Arne Andersen, stretch blow mold-ing product manager at KHS.
(696 kB)
1639841.attachment
„Die neue Konzeptflasche zeigt, welchen Maßstab wir beim Materialeinsatz bei gleichbleibender Behälterqualität erreichen können, wenn Verpackungsentwick-lung und Anlagentechnik ineinandergreifen“, erklärt Felix Kösters aus der KHS-Verpackungsentwicklung bei Bottles & Shapes.
(1 MB)
1639843.attachment
Mit dem Doppelgassen-Heizkonzept (DoGa) stehen Kunden PET-Linien zur Verfügung, die auf einen reduzierten Energie- und Platzbedarf ausgelegt sind.
(3 MB)
1639844.attachment
Die neue 1,5-Liter-Flasche für stilles Wasser wurde mit einem Gewicht von 15,5 Gramm realisiert.
- Mehr Infos zu dieser Meldung unter www.pressebox.de
- zurück zur Übersicht
